The gauge is attached to the object by a suitable adhesive, such as cyanoacrylate. This is called plastic strain. It will disappear after the stress is removed, and the material will return to its original state.The metal-foil strain gauge is commonly used when a very small amount of strain and dimensional change occurs.A strain gauge is a device used to measure the strain of an object. This type works by measuring the change in electrical resistance that occurs when an electrically conductive material deforms.
A strain gauge is an implement that is used to accurately measure this change in a material that is under load. At high levels of stress, a substance will deform to the point where it will not recover and return to its original dimensions. Understanding the dimensional changes that occur when an object experiences strain is important in many mechanical design applications. The foil is attached to a backing material that is electrically insulating, and will not conduct voltage or current.Elastic strain occurs when a material is subjected to a low level of stress. A strain gauge can be used to determine when a material undergoes plastic strain and permanent deformation has occurred. These are used to measure strain due to elongation caused by a pulling force, compression caused by a pushing force, or even pressure applied to a surface area by a weight or other load..Strain gauges are available for a variety of measurement applications. This resistance change, usually measured using a Wheatstone bridge, is related to the strain by the quantity known as the gauge factor.
Strain gauges are often used for experimental testing in a laboratory and can be permanently mounted to an object to allow ongoing measurement. The metal-foil strain gauge typically consists of a series of very thin parallel lines of pressure gauge dials conductive metal applied to a thin foil. Strain is a measure of the amount of deformation that occurs when an object is under stress.All materials will deform when a stress or load is applied. The most common type of strain gauge consists of an insulating flexible backing which supports a metallic foil pattern. As the object is deformed, the foil is deformed, causing its electrical resistance to change.
به وبلاگ خود خوش امدید